[HEADER]
VERSION=2						

[BASIC]
WHEELBASE=2.721									; Wheelbase distance in meters
CG_LOCATION=0.52								; Front Weight distribution in percentance

[ARB]
FRONT=32000
REAR=30000

[FRONT]
TYPE=STRUT	
BASEY=-0.095									; Distance of CG from the center of the wheel in meters. Front Wheel Radius+BASEY=front CoG. Actual CG height =(FWR+FBasey)+(RWR+Rbasey))/CG_LOCATION%	
TRACK=1.834										; Track width in meters (from pivot 3D placement of the 3d model of a wheel)	
ROD_LENGTH=0.0350								; push rod length in meters. positive raises ride height, negative lowers ride height.	
HUB_MASS=60										; masse sospese anteriori	
RIM_OFFSET=0.0	
STRUT_CAR=0.204, 0.46586, -0.014837		
STRUT_TYRE=0.088, -0.12932, 0.032	
WBCAR_BOTTOM_FRONT=0.50780, -0.114632, 0.27936	
WBCAR_BOTTOM_REAR=0.49670, -0.114632, -0.02186	
WBTYRE_BOTTOM=0.088, -0.12932, 0.032	
WBCAR_STEER=0.49670, -0.114632, 0.09	
WBTYRE_STEER=0.085, -0.12932, 0.122	
TOE_OUT=0.00030									; Toe-out expressed as the length of the steering arm in meters	
STATIC_CAMBER=-7.4								; Static Camber in degrees. Actual camber relative to suspension geometry and movement, check values in game	
SPRING_RATE=88725 								; Wheel rate stifness in Nm. Do not use spring value but calculate wheel rate	
PROGRESSIVE_SPRING_RATE=0						; progressive spring rate in N/m/m	
BUMP_STOP_RATE=100000							; bump stop spring rate	
BUMPSTOP_UP=0.0958								; meters to upper bumpstop from the 0 design of the suspension	
BUMPSTOP_DN=0.0303								; meters to bottom bumpstop from the 0 design of the suspension	
PACKER_RANGE=0.1048 							; Total suspension movement range, before hitting packers	
DAMP_BUMP=7605									; Damper wheel rate stifness in N sec/m in compression	
DAMP_FAST_BUMP=4144	
DAMP_FAST_BUMPTHRESHOLD=0.070	
DAMP_REBOUND=7697								; Damper wheel rate stifness in N sec/m in rebound	
DAMP_FAST_REBOUND=4500	
DAMP_FAST_REBOUNDTHRESHOLD=0.0120

[REAR]
TYPE=DWB
BASEY=-0.095									; Distance of CG from the center of the wheel in meters. Rear Wheel Radius+BASEY=Rear CoG  Actual CG height =(FWR+FBasey)+(RWR+Rbasey))/CG_LOCATION%
TRACK=1.688
ROD_LENGTH=0.027					
HUB_MASS=60
RIM_OFFSET=0.0	
WBCAR_TOP_FRONT=0.40966, 0.06335, 0.0600
WBCAR_TOP_REAR=0.40966, 0.06335, -0.0400
WBCAR_BOTTOM_FRONT=0.40966, -0.12704, 0.20187
WBCAR_BOTTOM_REAR=0.57345, -0.16797, -0.11831
WBTYRE_TOP=0.15133, 0.06900, 0.03682
WBTYRE_BOTTOM=0.12446, -0.18200, -0.05023
WBCAR_STEER=0.43966, -0.18022, 0.18187
WBTYRE_STEER=0.10130, -0.20633, 0.20023
TOE_OUT=-0.00185
STATIC_CAMBER=-0.3
SPRING_RATE=77108  
PROGRESSIVE_SPRING_RATE=0
BUMP_STOP_RATE=100000
BUMPSTOP_UP=0.1606								; meters to upper bumpstop from the 0 design of the suspension
BUMPSTOP_DN=0.0391	 							; meters to bottom bumpstop from the 0 design of the suspension
PACKER_RANGE=0.1591								; Total suspension movement range, before hitting packers
DAMP_BUMP=10400									; Damper wheel rate stifness in N sec/m in compression
DAMP_FAST_BUMP=3800								; Damper wheel rate stiffness in N sec/m in fast speed compression
DAMP_FAST_BUMPTHRESHOLD=0.070				  	; Damper bump slow/fast threshold in seconds
DAMP_REBOUND=13200								; Damper wheel rate stifness in N sec/m in rebound
DAMP_FAST_REBOUND=5400							; Damper wheel rate stiffness in N sec/m in fast speed rebound
DAMP_FAST_REBOUNDTHRESHOLD=0.120	


[GRAPHICS_OFFSETS]
WHEEL_LF=0.0									; Left front graphical offset of the wheel positioning in the x axis (width). + is left - is right movement
SUSP_LF=0.0										; Left front graphical offset of the suspension positioning in the x axis (width). + is left - is right movement
WHEEL_RF=-0.0									; Right front as above
SUSP_RF=-0.0									; Right front as above
WHEEL_LR=0.05									; Left rear as above
SUSP_LR=0.05									; Left rear as above
WHEEL_RR=-0.05									; Right rear as above
SUSP_RR=-0.05	

[DAMAGE]
MIN_VELOCITY=40									; MINUMUM VELOCITY TO START TAKING DAMAGE
GAIN=0.0004										; AMOUNT OF STEER ROD DEFLECTION FOR IMPACT KMH
MAX_DAMAGE=0.05									; MAXIMUM AMOUNT OF STEER ROD DEFLECTION ALLOWED
DEBUG_LOG=1										; ACTIVATES DAMAGE DEBUG IN THE LOG
